.jpg)
Innovative REAL GOLD Interior Emulsion Paint is a Rich Matt finish acrylic interior paint gives your wall satin looks
It is recommended for all types of interior surface like smooth cement plaster, False Ceiling, Asbestos sheet, concrete surface. Avoid surfaces with continuous dampness and seepages.
New Surface :
New surface should be given enough time to cure. Make the surface smooth and uniform. Clean the surface from grease, loose or flaking particles. Apply a coat of REAL GOLD Cement Primer(W/T) or one coat of REAL GOLD Emulsion diluted with clean water in 1:1 ratio by volume.
Old Surface :
Using an Emery Paper clean the surface free from all loose and powdery material and old paints film apply a coat of Real Gold Cement Primer(W/T) or one coat of REAL GOLD Interior Emulsion diluted with clean water in 1:1 ratio by volume.
Finishing :
Apply 2 coats of REALGOLD Interior Emulsion thinned with 400-500 ml by volume of potable water per ltr paint. Allow drying time 3-4 hours between the coats.
SStir Well and Strain before use. Please do not add any kind of chemical or thinner in paint. Over dilution of REAL GOLD Plastic Emulsion may result in shade variation, poor hiding, poor bonding, or flaking. Excess brushing and stretching are also to be avoided.
Store in well ambient conditions, Ventilated locations and away from the source of ignition and fire. Keep away from children. In case of eye/skin contact, wash with plenty of water. Inhalation/Injection will cause danger. In case move to fresh air and consult medical practitioners in both the cases. Do not apply when ambient temperature might drop to level below 10°c within 4 hrs of application. Avoid thinning for better result The container must be tightly closed when not in use. Stir well and strain before use. Use safety equipments like rubber or polythene gloves, safety goggles/ glasses & face mask.
Covering capacity of the paint will vary depending on substrate, surface preparation, method of application and other factors. The practical covering capacity will differ from the theoretical covering capacity. As precautions, an initial trial may be undertaken to determine covering capacity of very rough or abnormal surfaces. All surface painted with Acrylic Emulsion Paints can be cleaned for stains using mild soap solution and soft clean sponge ensuring a minimum period of 5 weeks from date of application for curing of the surface.
